|
|
HAZ-SCANNER GB-2000
Indoor Environmental Quality Monitor
- Direct reading
- Measures and displays data for up to 14 critical indoor parameters
- Standard configuration measures 5 parameters including PM10 or TSP particulates, CO2, CO, temperature, and relative humidity
- Add one or all optional plug and play sensors (up to 4) and/or GB-2000-specific
meters (up to 5) as listed below
Choose from additional toxic gas sensors, PID for VOCs, and
GB-2000-specific light intensity, sound/noise, atomic/nuclear radiation, ELF radiation, and air velocity meters
- Available analog input port for alternative meter
- Interchangeable size-selective impactors are available for
PM1.0, PM2.5, or PM4.0 (close approximation of respirable)
- In-line standard 37-mm or optional 25-mm gravimetric filter cassette provides concurrent filter sampling for chemical and biological analysis
- Internal sample pump provides 1 to 4 L/min flows
- NiMH battery for 8-hour operation, continuous operation with AC power
- Displays TWA, STEL, Max, and Min
- Optional alarm indicator light and siren for user-defined threshold limits
- Removable handheld meters for spot-checking remote areas
- Datalogging and optional real-time wireless data transmission
- Easy-to-use graph and reporting software — compatible with PC and
Mac
Haz-Scanner Product Data Bulletin
(PDF)
The HAZ-SCANNER™ portable indoor environmental quality (IEQ) monitor is
designed to measure critical parameters for indoor environmental assessments,
green building certifications, school zone measurements, job task analysis, and
occupational health and safety compliance. The GB-2000 displays real-time readings
with datalogging capabilities. Configure GB-2000 for up to 14 simultaneous
critical
indoor
measurements in one portable instrument. HAZ-SCANNER can also be configured for
wireless data acquisition to allow for continuous unattended sampling up to one
mile. Easily download data to a PC or Mac and create compliance-ready graphical
reports with the supplied software.
HAZ-SCANNER GB-2000 Applications
- Snapshot air profiles at schools
- Green Building certifications
- Job task analysis
- OSHA compliance
- IEQ assessment
|
 |
Performance Profile
Optimized for indoor environmental quality applications. Custom calibration for specific ranges and ambient applications upon request.
| GB-200 Sensor |
Measurement/Concentration Range |
| Particulates |
| 90° Infrared
Light Scattering |
1 to 20,000 µg/m3
or
0.01 to 200 mg/m3 |
| Particle Size Range |
0.1 to 100 µm |
| Particle Size Measurement |
1 µm, 2.5 µm, or 4.0 µm (optional)
10 µm or TSP (standard) |
| Volatile Organic Compounds (VOCs) |
| PID (10.6 eV) |
0 to 2000 ppm (optional) |
| Carbon Dioxide |
| NDIR |
0 to 10,000 ppm (standard) |
| Toxic Gases (Electrochemical) |
| CO-Carbon Monoxide |
0 to 1000 ppm (standard) |
| NO-Nitric Oxide |
0 to 100 ppm (optional) |
| NO2-Nitrogen Dioxide |
0 to 50 ppm (optional) |
| O2-Oxygen |
0 to 30% (optional) |
| O3-Ozone |
0 to 0.5 ppm (optional) |
| O3-Ozone |
0 to 10 ppm (optional) |
| SO2-Sulfur Dioxide |
0 to 50 ppm (optional) |
| H-Hydrocarbon |
0 to 1000 ppm (optional) |
| Other Parameters (GB-2000-specific
meters) |
| Temperature |
0 to 140 F (-18 to 60 C)—(standard) |
| Relative Humidity (RH) |
0 to 100% (standard) |
| Light Intensity |
0 to 50,000 Lux/0 to 5000 fc (optional) |
| Sound |
30 to 135 dB (optional) |
| Atomic/Nuclear Radiation |
1 to 19,999 counts per minute (cpm) (optional) |
| ELF Radiation |
1 to 200 milligauss (mG) (optional) |
| Air Velocity |
0 to 30 m/s or 0 to 5910 ft/min (optional) |
| Dew Point Temperature |
-47.2 to 122 F (-44 to 50 C) |
| Wet Bulb Temperature |
3.2 to 122 F (-16 to 50 C) (one meter-optional) |
| HAZ-SCANNER Instrument Specifications |
| Display | LCD |
| Operation | 4-key splash-proof membrane switch |
| Power | 12-V NiMH rechargeable battery |
| Operating Time | 8 hrs on battery, continuous on AC |
| Display Measurements | TWA, STEL, Max, Min |
| Recording Time | 1 sec to 21 weeks |
| Sampling Rate |
1 sec, 1 min, 10-min intervals |
| Data Storage | 36,000 data points |
| Sampling Pump | 1 to 4 L/min |
| Digital Output |
RS-232 (PC), RS-423 (Mac) |
| Software | PC or Mac compatible |
| Dimensions | 7 x 4 x 11 in (17.8 x 10.2 x 28 cm) |
| Weight | 6 lbs (2.7 kg) |
| Operating Temperature | 32 to 122 F (0 to 50 C) |
| Storage Temperature | -4 to 140 F (-20 to 60 C) |
| Humidity | 95% non-condensing |
| Wireless Radio Modem | 900 MHz (U.S.) 868 MHz (Euro) |
| Auxiliary Analog Input |
0 to 2.5 VDC (1 channel for alternative meter) |
Ordering Information
| Description |
Cat. No. |
HAZ-SCANNER GB-2000 includes monitor with PM10 or TSP particulate,
CO2, CO, temperature, and relative humidity sensors, charger, HazComm Pro Software,
cables, CD-ROM with instructions, and carry case
Requires calibration using appropriate calibration gas(es) and regulator sold
separately
HAZ-SCANNER GB-2000 is expandable to up to 14 parameters; see sensors and
meters listed below.
|
|
GB-2000-specific Optional Meters
(Choose up to 5 ), each includes holder to mount meter on tripod
accessory
|
| Air Velocity Meter, 0 to 30 m/s or 0 to 5910 ft/min | |
| Atomic/Nuclear Radiation Meter, 1 to 19,999
cpm | |
| ELF Radiation Meter, 1 to 200 mG | |
| Indoor Light Intensity Meter, 0 to 50,000 lux/ 0 to 5000 footcandles | |
GB-2000-specific Optional Sensors
(Choose up to 4 )†
|
| Nitrogen Dioxide Sensor, 0 to 50 ppm* | |
| Sulfur Dioxide Sensor, 0 to 50 ppm* | |
| Oxygen Sensor, 0 to 30%* | |
| Ozone Sensor, 0 to 0.5 ppm* |
|
| Ozone Sensor, 0 to 10 ppm* | |
| PID for VOCs, 0 to 2000 ppm (isobutylene equivalent) | |
| Accessories
|
| Size-selective Impactors |
PM1.0 |
|
| PM2.5 |
|
| PM4.0 |
|
| Calibration Standard, particulate | |
| Calibration Regulator, 1.0 L/min fixed flow,
male thread, for use with 34/58 L aluminum cylinder, required for use
with calibrator
gas for toxic gases |
|
| Tripod Stand for HAZ-SCANNER GB-2000 includes
holder for GB-2000 | |
| Alarm for HAZ-SCANNER GB-2000 | |
| Wireless Radio Modem, 900 MHz, 300 feet | |
| Wireless Radio Modem, 900 MHz, up to 1500 feet |
|
| † |
Hydrocarbon sensors and specialty sensors
for nitric oxide, chlorine, hydrogen cyanide, and hydrogen sulfide
are available. Contact
SKC; specify gas type when ordering. |
| * |
Additional calibration gas for the specific chemical is required when
using additional toxic gas sensors. |
Haz-Scanner Product Data Bulletin (PDF)
This page was last modified May 13, 2010
|
