

Training	Online Store	Rentals	Sales & Service	Contact SKC

Headlines:	Oil Spill Response		Green Building Testing	Nanoparticle Measurement	Anasorb CMS Status

Deal of the Month. Special pricing Click Here

Low Flow Pump 222 Series

The Low Flow Sample Pump Workhorse
for Sorbent Tubes and Sample Bags

Ordering Information

222 Series Operating Instructions (PDF)

UL Certificate of Compliance

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

MSDS for Nickel Cadmium Battery GPI International (PDF)

MSDS for Nickel Cadmium Battery SANYO Energy (PDF)

Features

Reliable for STEL, Ceiling, and TWA sampling
10 hours of run time on one battery charge
Maintains constant sampling rate
Exhaust port for bag sampling
Adjustable flow rate control — 50 to 200 ml/min
Compact and lightweight – 5.1 x 2.5 x 1.25 inches (13 x 6.4 x 3.2 cm), 12 ounces (340 grams)
Tamper-resistant control cover
Simple to use and easy to repair
Recessed controls for use with or without cover
UL Listed for intrinsic safety; Class I, Groups A, B, C, and D. CE marked
Durable, shock-resistant case includes rugged belt clip

The SKC 222 low flow sample pumps have long been recognized as the most dependable and durable pumps in the industry. These miniature diaphragm-type pumps are ideal for on-worker or area sampling of gases and vapors in air. Using reliable stroke counter technology, the 222 low flow pumps offer both a suction port for sorbent tubes and a pressure port for sample bags. SKC sample pumps have special patented valves that close positively; this is important because the heart of any pump is its valves. With over 35 years of use in the industry, the 222 low flow pumps have demonstrated their reliability.

**Performance Profile**
Flow Rate	222-3: 50 to 200 ml/min 222-4: 20 to 80 ml/min
Operation Time	10 hrs on one battery charge
Battery	Rechargeable NiCad, 2.4 V Caution: Intrinsic safety is invalid without an SKC-approved battery
Charge Time (varies with capacity and level of charge)	6 to 8.5 hrs with PowerFlex charger
Battery Regulator	Regulator holds voltage constant
Counter Readout	Digital readout of pump strokes up to 6 digits
Valves	Zero-leak valves
Pumping Action	Diaphragm
Operating Temperature	32 to 113 F (0 to 45 C)
Charging Temperature	32 to 113 F (0 to 45 C)
Storage Temperature	-4 to 113 F (-20 to 45 C)
Case	Sturdy, lightweight plastic
Dimensions	5.1 x 2.5 x 1.25 in (13 x 6.4 x 3.2 cm)
Weight	12 oz (340 gm)
Approvals	UL Listed for intrinsic safety; Class I, Groups A, B, C, and D CE marked

Protect sample pump from weather when in use outdoors.

Intrinsic safety and other approvals may be void if SKC pumps are not repaired by SKC or authorized SKC repair centers. In addition, replacing parts with non-SKC parts voids intrinsic safety approvals and the manufacturer warranty.

Ordering Information

Description and Applications		Cat. No.
Pump Only, 50 to 200 ml/min, for use with sample bags or sorbent tubes, requires charger, see kits or accessories below		222-3
Pump Only, 20 to 80 ml/min, for use with sample bags, sorbent tubes, or long-duration color detector tubes, requires charger, see kits or accessories below		222-4
Pump with Charger, 50 to 200 ml/min, with single 100-240 V charger	100-240 V	222-3KC
Single Pump Kit, 50 to 200 ml/min, includes low flow sample pump, Type A tube holder, single charger with cable, and a soft-side nylon carry case	100-240 V	222-3DK
Single Pump Kit, 20 to 80 ml/min, includes low flow sample pump, Type A tube holder, single charger with cable, and a soft-side nylon carry case	100-240 V	222-4DK
5-pack Pump Kit, 50 to 200 ml/min, includes 5 low flow sample pumps and Type A tube holders, one 5-station charger with cables, and a heavy-duty case	100-240 V	222-3DK5
5-pack Pump Kit, 20 to 80 ml/min, includes 5 low flow sample pumps and Type A tube holders, one 5-station charger with cables, and a heavy-duty case	100-240 V	222-4DK5
Pump Certificate		Cat. No.
Certificate of Compliance, optional, must be ordered when ordering pump		P1501
Calibrator		Cat. No.
Portable Flowmeter Kit, 5 to 500 ml/min, includes precision glass buret, film solution, operating instructions, and carry case		303
Chargers — PowerFlex Charging Systems		Cat. No.
PowerFlex 5-station 100-240 V includes power supply and cord Purchase pump-specific cables separately; choose from the list below. For U.S.-produced pump models only, not compatible with EX and ATEX-approved models		223-1000
PowerFlex Single 100-240 V includes power supply and cord Purchase pump-specific cables separately; choose from the list below. For U.S.-produced pump models only, not compatible with EX and ATEX-approved models		223-2000
Replacement CE-marked Power Supply for 5-station PowerFlex Charger		P22310
PowerFlex Cables		Cat. No.
222 Low Flow,1 cable		223-1005
Replacement Pump Battery and Tools		Cat. No.
Replacement NiCad Battery Pack Replacing batteries with non-approved battery packs voids the pump warranty and UL intrinsic safety approvals.		222-3SR-04
SKC Universal Screwdriver Kit, for use with sample pumps, includes 3 interchangeable screwdriver heads		224-11
SKC Pneumatic Test Kit, for testing flow compensation in personal sample pumps, 1 to 5 L/min rotameter, 0 to 80 inches magnehelic pressure gauge		224-6580