

Training	Online Store	Rentals	Sales & Service	Contact SKC

Headlines:	Oil Spill Response		Green Building Testing	Nanoparticle Measurement	Anasorb CMS Status

Deal of the Month. Special pricing Click Here

QuickTake 30 Sample Pump

Take High Flow on the Go!

QuickTake 30 Operating Instructions (PDF)

QuickTake 30 Spec. Sheet (PDF)

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

MSDS for Lithium-Ion Rechargeable Battery (PDF)

Chinese Language QuickTake 30 Operating Instructions (PDF)

10 to 30 L/min constant flow sample pump
- Maintains set flow throughout a sampling period for complete sample integrity
- Ideal for use with BioStage viable cascade impactors, spore trap cassettes such as the VersaTrap, microvacuum cassettes, or other samplers that require flows to 30 L/min
Long run times on one Li-Ion battery charge
- AC charger/adapter for extended sampling
- Rechargeable lithium-ion battery pack
Easy to use programmable timer for unattended sampling
- Select sample time presets or customize timer from 1 to 999 minutes
- Continuous run with manual shut-off
- Intermittent sampling
- Large, easy-to-use keypad
Compact and portable
- 9.3 x 8.4 x 3.5 inches (23.6 x 21.3 x 8.9 cm)
- Weighs only 4.8 pounds (2.2 kg)
- Handle for easy portability
Versatile sampling accessories
- Wand for sampling in ductwork and other hard-to-reach areas
- Optional mounting bracket for viable impactor
Easy to use
- Large keypad control
- End-of-cycle visual and audible alarms
- Handy front-mounted intake for fast and simple media setup
High-contrast digital display

Performance Profile

Flow Range

10 to 30 L/min

Flow Compensation Accuracy

± 5% of set flow

Compensating Flow Back Pressure Range

10 L/min at 90 inches water back pressure
20 L/min at 50 inches water back pressure
30 L/min at 15 inches water back pressure

*Typical Back Pressure of Sampling Media (inches water)*
Flow Rate	10.0	12.0	15.0	20.0
Filter/Pore Size (µm)
25-mm MCE/0.8	65	80	103	148
25-mm MCE/0.45	138	172	> 200	—
37-mm MCE/0.8	22	28	36	51
37-mm PVC/5.0	9	11	15	21
Compare the information in this table to compensation range to determine appropriate applications.

Power

Rechargeable 7.4-volt, 9.6-Ah capacity, 71.04 Wh lithium-ion (Li-Ion) battery or battery with AC charger/adapter (100-240 V)

Battery Recharge Time

Approximately 5 hrs with approved charger

Typical Cumulative Run Time‡

Spore Trap (VersaTrap): 5 hrs at 15 L/min (battery only)
BioStage viable cascade impactor: 4 hrs at 28.3 L/min (battery only)
25-mm, 1.2-µm MCE filter: For maximum air volumes during asbestos clearance sampling, use QuickTake 30 with a 25-mm, 1.2-µm MCE filter at 10 L/min with fully charged battery and AC charger/adapter to achieve 9+ hrs of run time, a total air volume of 5400 L
37-mm, 0.8-µm MCE filter: 14 hrs at 10 L/min (battery only)

Note: The AC charger/adapter can be used to extend battery run time, but it is not a battery eliminator. Therefore, it will not provide indefinite run times.

Temperature

Operating: 32 to 113 F (0 to 45 C)
Storage: -4 to 95 F (-20 to 35 C)
Charging: 32 to 113 F (0 to 45 C)

Run Time Features

User-selectable features, user-adjustable presets. See Operating Instructions.
Preset timed runs: 1, 2, 5, 10, or 15 min
Manually set continuous run with manual shut-off: 1 to 999 min (repeats 1 to 999-min runs indefinitely until user stops pump or power supply is depleted)
Intermittent sampling: User-set sample periods and sample delays. See Operating Instructions.

Flow Fault Features

If the pump is unable to compensate due to excessive back pressure, the pump will go into flow fault mode. Flow fault features are enabled as the default setting. Flow fault may be disabled at the user’s option. See Operating Instructions.
Flow fault: Flow fault displays immediately. Pump shuts off after 5 seconds.
Fault restart: Pump attempts restart every 10 seconds up to five times.

Media Compatibility

BioStage viable cascade impactors, spore trap cassettes, microvacuum cassettes, and other samplers that require flows to 30 L/min

Housing

ABS plastic

Dimensions

9.3 x 8.4 x 3.5 in (23.6 x 21.3 x 8.9 cm)

Weight

4.8 lbs (2.2 kg)

‡ Results are obtained using a new pump and new fully charged battery. Pump performance may vary.

Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety.
Protect sample pump from weather when in use outdoors.

The SKC QuickTake 30® constant flow diaphragm pump maintains a set flow rate throughout the sampling period, compensating for the inherent back pressure created by sampling media and for any increase in back pressure as sample collects on the media. Unlike similar pumps, the QuickTake 30:

Maintains true constant flow

Can be calibrated with any primary standard calibrator for valid calibration

Does not require a special rotameter or hot-wire anemometer for calibration

Can be used with remote sampling wand and media that creates back pressure such as wall cavity samplers

Ideal for use with the BioStage

BioStage Impactor attached to QuickTake 30 Sample Pump

QuickTake 30 with BioStage on mounting bracket
It's high flow sampling on the go! The portable SKC QuickTake 30 Sample Pump provides fast, easy sampling with the SKC BioStage Viable Cascade Impactor. Use the simple mounting bracket accessory to attach the BioStage directly to the QuickTake 30 pump. There is no need for bulky accessories or line voltage. Sampling with an impactor couldn't be easier!

QuickTake 30 with VersaTrap on sampling wand

QuickTake 30 with VersaTrap

QuickTake 30 with VersaTrap

Ordering Information

Description		Cat. No.
*QuickTake 30 Sample Pump^†** includes battery pack and cassette and tubing adapters, requires 223-245 charger accessory below Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety. Not CE marked		228-9530C
QuickTake 30 Sample Pump and Charger^†includes one pump with battery pack, AC charger/adapter (100-240 V), cassette and tubing adapters, and tubing Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety. Not CE marked*		228-9530
*QuickTake 30 Sample Pump, Rotameter, and Charger^† includes one pump with battery pack, AC charger/adapter (100-240 V), cassette and tubing adapters, rotameter, and tubing Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety. Not CE marked**		228-9530A
QuickTake 30 BioStage Pump Kit^† includes pump and charger as described above, Standard BioStage Impactor, mounting bracket with inlet adapter, calibration adapter, and rotameter, in a deluxe carry case Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety. Not CE marked*		228-9530K
Pump Certificate
Certificate of Compliance, optional, must be ordered when ordering pump		P1501
Chargers
Charger/Adapter, 100-240 V		223-245
Calibrators, Rotameters, and Accessories
Defender Primary Standard Calibrator, 300 ml/min to 30 L/min, includes lead-acid battery, multi-plug charger (100-240 V), Optimizer software, and 39-inch (1-meter) serial cable		717-510H
Replacement Defender Lead-acid Battery Pack		717-506
Defender Universal Charger, 100-240 V, with U.S., Euro, and Australia plugs		717-509
Defender Universal Charger, 100-240 V, with U.S. plug		717-507
Rotameter, 3 to 30 L/min		320-100
Sampling Accessories
Sampling Wand, telescopes to 34 inches (0.9 meter) for ductwork and hard-to-reach locations, includes 6 feet (1.8 meters) of tubing		228-9521
Cassette Adapter, for use with QuickTake 15 and QuickTake 30 Sample Pumps This adapter is also used as the calibration adapter.		P33100
Tripod Stand, telescopes to 5 feet (1.5 meters) for mounting sample media QuickTake 30 pump will not mount on this stand.		225-9536
Mounting Bracket for BioStage Impactor includes inlet adapter		228-9531
Tygon Tubing, 3/8-inch ID	10 feet	225-1351
	50 feet	225-1352
Replacement Parts
Replacement Inlet Filters, pk/50		P40021A
Replacement Filter/O-ring set includes 5 filters and 1 O-ring		P40021
Stem Tubing Adapter, barbed tubing adapter for use with tubing and a standard filter cassette, pk/2		P31239
Reducing Adapter for Tubing, 3/8 inch to 1/4 inch, pk/2		P31211
*Lithium Ion Replacement Battery Pack,** for QuickTake 30 Series pumps		P75689
Replacement Stack for QuickTake 30 Pump		P21266

Note:	The AC charger/adapter can be used to extend battery run time, but it is not a battery eliminator. Therefore, it will not provide indefinite run times. Use only the SKC-approved charger for this pump. Use of an unapproved charger may damage the battery and the pump.
^†	For bioaerosol sampling at 15 L/min, SKC recommends using the Leland Legacy pump (5 to 15 L/min) or the QuickTake 30 pump (10 to 30 L/min)

Li-Ion Battery Shipment
Rechargeable lithium-ion batteries for use with SKC sample pumps have been tested in accordance with the UN Manual and are proven to meet requirements of each test in the UN Manual of Test Criteria, Part III, subsection 38.3. They have a watt-hour (Wh) rating below 100.

Per 2010 IATA regulations, packaging must meet the specifications of and contain labeling and documentation required by IATA Packing Instructions 965, 966, and 967. See IATA Guidance
Document: Transport of Lithium Metal and Lithium Ion Batteries, Revised for the 2010 Regulations

QuickTake 30 Operating Instructions (PDF)

QuickTake 30 Spec. Sheet (PDF)

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

MSDS for Lithium-Ion Rechargeable Battery (PDF)

Chinese Language QuickTake 30 Operating Instructions (PDF)