|
The reliable 535 Carbon Dioxide Monitor with permanently attached
probe can be used to quickly assess carbon dioxide concentration
levels on both a short-term and long-term basis. An infrared
printer for documentation is available separately |
|
|
The Testo 317-3 Carbon Monoxide Monitor STICK quickly detects
carbon monoxide in ambient air and warns the
user of dangerous CO concentrations with visual and audible
alarms |
|
|
Personal Confined Space Entry Monitor with PID
EntryRAE monitors
up to four gases and features a modular patented self-cleaning
PID to detect VOCs. |
|
|
Interchangeable, user-replaceable, electrochemical sensors
for the Pac III, MiniWarn, and X-am 7000 gas monitors |
|
|
Smallest Hand-held Photo-ionization Detector |
|
|
The MiniRAE 3000 photoionization detector (PID) with a range
of 0 to 15,000 ppm makes it suitable for applications from
industrial hygiene to leak and HazMat detection. Available
wireless technology allows real-time data transmissions with
a base controller located up to 500 feet away from the monitor.
A PC can be used as the base station. |
|
|
The ppbRAE 3000 with extended-range PID from 1 ppb to 10,000
ppm is ideal for HazMat/Homeland Security, industrial hygiene,
IAQ, and military applications. Available wireless technology
allows real-time data transmissions with a base controller
located up to 500 feet away from the monitor. A PC can be used
as the base station. |
|
|
Miniwarn (nondatalogging) lightweight four-gas monitor. Configure
for your application; accommodates 1 catalytic (LEL) sensor
and
3 interchangeable
electrochemical sensors Choose from over 28 quick-change sensors |
|
|
Unique 5-gas Combination: Accommodates LEL, O2 and
a PID plus any two plug-in smart toxic gas sensors. 11 smart
sensors available. |
|
 |
Drager PAC III single-gas personal monitor (non-datalogging)
30 intelligent electrochemical sensors available. Change sensors
quickly and easily. Fast, accurate response to targeted gases
and vapors |
|
 |
The Pac® 3500 provides over two years of maintenance-free
monitoring of carbon monoxide, hydrogen sulfide, or oxygen.
A large LCD displays actual concentration during alarm and
uses new XXS sensor technology for rapid response. Other
features include alarms, lithium battery, IR interface, and
bump test mode.
|
|
 |
Designed for long use without sensor replacement,
the Dräger Pac 5000 provides over two years of maintenance-free
operation. The Pac 5000 is ideal for personal monitoring
of carbon monoxide, hydrogen sulfide, or oxygen in workplaces. |
|
 |
The Dräger Pac 7000 builds on the convenient features
of the Pac 5000 by adding indefinite service life, replaceable
sensors, adjustable TWA and STEL threshold alarms, TWA, STEL,
and peak display, built-in bump test and calibration menu.
|
|
|
RAE QRAE Plus (datalogging) Complete Monitor for up to dour different
dases. Twelve reliable plug-in smart sensors available |
|
|
The ToxiRAE II is a single-gas personal protection, reusable
monitor that provides continuous readouts of toxic gas concentrations,
STEL, TWA, and Peak values as well as high, low, TWA, and STEL
alarms |
|
|
QRAE II 1 to 4-sensor Gas Monitor (dataloging) 1 to 4 plug-in
sensors measure combustibles, O2, H2S,
and CO |
|
|
Next-generation Single-gas Solution for H2S or CO . The
full-featured ToxiRAE 3 single-gas monitor is quick, small,
and tough. Fast response time provides better protection
and worker safety.
|
|
|
Hand-held Compound-specific Monitor |
|
|
Handheld VOC Monitor. UltraRAE 3000 is the most advanced
compound-specific monitor available with an extended PID range
of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in
benzene-specific mode. |
|
|
Configure for combustible gases/vapors and up to
three gases including O2, CO, and H2S |
|
|
Configure for combustible gases/vapors and up to three gases
including O2, CO, and H2S |
|
|
Reliable Monitoring of H2S, CO, O2, and Combustible
Gas in Ambient Air |
|
|
This 1 to 5-gas detector reliably measures combustible gases and vapors as
well as oxygen and harmful concentrations of CO, H2S, CO2, Cl2,
HCN, NH3, NO2, PH3, and SO2. |
|
 |
The Drager X-am 7000 is your solution for the simultaneous
and continuous detection of up to five gases. Equip the X-am
7000 with your choice of three electrochemical sensors and
two catalytic bead or infrared sensors. |