|
|
SKC Deployable Sampler Systems
Transportable Ambient Air Kits
- Compact and portable — only one case!
- Fast setup with modular components and quick-connect tubing
- Ideal for remote locations and indoor air sampling
- 24-hour Li-Ion battery-operated system
- Easy, secure operation from within a heavy-duty lockable case
- Quick-mount bracket is easy to install
- Quick-change battery packs
- Rain cover protects sampling head
- Compact for easy transport
- Low noise for indoors
- System pump provides constant, accurate airflows
- Simple 3-button keypad for setting a single unattended sample run
- Program for multiple runs with a PC and DataTrac for Leland Legacy Software
- Available for sampling PM10, PM2.5, or PAHs/PHDDs/PHDFs
Originally designed for the U.S. Military, SKC now offers portable, lightweight, and cost-effective ambient air sampling systems. Two complete sampling systems are available for target compounds: (1.) PM10 or PM2.5, (2.) polycyclic aromatic hydrocarbons (PAHs)/polyhalogenated dibenzo-p-dioxins (PHDDs)/polyhalogenated dibenzofurans (PHDFs). Both kits feature the fully programmable Leland Legacy Sample Pump with high-power Li-Ion battery for over 24 hours of run time. Specially designed sampling heads are easily loaded with media and deployed. Accessories such as a quick-mount bracket and quick-connect tubing provide for convenient setup. Unlike other ambient sampling systems, SKC deployable systems fit into one heavy-duty, compact Pelican case that is easily carried or shipped and takes only a few minutes to deploy. The pump operates from inside the case for protection during sampling. SKC deployable sampler systems offer the added advantage of PC programmability with the DataTrac Software accessory for advanced scheduling options and record keeping.
Deployable Systems Performance Profile
| Flow Rate |
10 L/min |
| Run Time |
> 24 hrs (one battery charge) |
| Power |
Rechargeable Li-Ion battery, 7.4 V, 12-Ah capacity, 88 Wh |
| Case Dimensions |
18.5 x 14.1 x 6.9 in (47 x 36 x 18 cm) |
| System Weight |
DPS: 13 lbs (5.9 kg)
DCS: 12.2 lbs (5.5 kg) |
Deployable Particulate Sampler (DPS) System
For 24-hour Ambient PM10 or
PM2.5 Sampling
|
|
DPS System |
Patented IMPACT sampling head for DPS.
For more information see the
Impact Sampler page
U.S. Patent No. 7,334,453 |
DPS Ordering Information
| Description |
Qty. |
Cat.
No.
|
DPS System includes
sample pump with connection case, charger (100-240 V), IMPACT
sampling head, 2 filter cassettes, calibration adapter, rain
cover, 25 disposable impaction disks (limited shelf-life), filter
cassette opener, tubing
with
quick-connect fitting, and mounting bracket in a heavy-duty lockable
carry case. Two external battery assemblies with adapters are
packaged separately
DPS Systems contain Leland Legacy pumps with Li-Ion batteries
and may be subject to special shipping regulations dependent
upon
quantity.
Use in non-explosive environments only.
Not UL Listed for intrinsic safety.
Provides data similar to data
from Federal Reference Method samplers. The DPS System is not a
Federal Reference Method sampler.
|
PM10 Kit |
ea |
|
PM2.5 Kit |
ea |
|
Collection
Filters for DPS System (not supplied with system)
Select a collection filter based on your application; required
for sampling |
Qty. |
Cat. No.
|
| Quartz Filters, 47
mm, Tissuquartz, 432 µm thick |
25 |
|
PTFE (Teflon) Filters, 47
mm, 2.0-µm pore size, with PMP support ring
Back pressure on PTFE (Teflon) filters can vary within the same
lot.
The maximum operating temperature is 464 F (240 C) based on PMP support
ring. |
50 |
|
| Accessories |
Qty.
|
Cat.
No.
|
| Replacement Impaction
Disks, 37 mm, pre-oiled, ready to use, disposable Required
for sampling,limited shelf-life |
25
|
|
50
|
|
| Petri Dish Slide, for filter transport |
100 |
|
DataTrac Software for Leland Legacy includes
software on CD, DataTrac adapter, and DataTrac cable. Requires
Windows 98 or higher and available serial port or USB to serial
adapter compatible with the PC and system
|
ea |
|
DPS
Spec. Sheet (PDF)
DPS
Operating Instructions (PDF)
DPS Quick
Guide (PDF)
Deployable
Particulate Sampler (DPS) Poster Presentation at NAVY’s 45th Annual
Occupational Health and Preventative Medicine Conference (PDF)
Modular
Impactors Poster Presentation (PDF)
Deployable Cartridge Sampler (DCS) System
For 24-hour Ambient Sampling of PAHs/PHDDs/PHDFs/Associated
Particulate
|
|
DCS System |
Sampling head holds media cartridge for
DCS |
DCS Ordering Information
| Description |
Cat. No. |
| DCS System includes sample pump
with connection case, charger (100-240 V),
sampling
head, calibration adapter, rain cover, sample tubing with quick-connect
fitting, calibration tubing, and mounting bracket in a heavy-duty
lockable carry case. Two external battery assemblies with adapters
are packaged separately. Cartridges, filters, and media
available separately |
|
| DCS Cartridges, stainless steel,
required for sampling; select based on application Require media
below |
Cat. No. |
| DCS Cartridge Marked for TO-9A, supplied in Teflon
jar without media |
|
| DCS Cartridge Marked for TO-13A, supplied in Teflon
jar without media |
|
| Media, required, select based on
application |
Cat. No. |
| PUF, (polyether type), 40-mm diameter,
cleaned, includes 3 PUFs wrapped in foil and supplied in glass
jar with lid |
|
| XAD-2 Sorbent, 100 gm, 20/60 mesh size, cleaned,
supplied in glass jar with lid |
|
| XAD-2 Sorbent, 20 gm, 20/60 mesh
size, cleaned, supplied in glass jar with lid |
|
| Quartz Filters, 47 mm, Qm-A, 100/pk |
|
| Accessories |
Cat. No. |
DataTrac Software for Leland Legacy includes software
on CD, DataTrac adapter, and DataTrac cable. Requires Windows
98 or higher and available serial port or USB to serial adapter
compatible with the PC and system
|
|
DCS
Operating Instructions (PDF)
DCS Quick
Guide (PDF)
This page was last modified June 1, 2009
|
