 |
|||||||||||
 |
 |
 |
 |
 |
 |
||||||
| |
|||||||||||
Accessories for Filter Sampling
Cassette Blanks, Solvent Resistant
Complete Filter List
Filter Selection Guide
Filter/Cassette Solvent Compatibility Chart
Cassette Shrink Bands
provide a smooth writing surface for sample identification and prevent tampering
provide a smooth writing surface for sample identification and prevent tampering
| Description | Qty. | Cat. No. | |
| Cassette Shrink Bands, White | 25 mm with cowl | 100 | 225-2503 |
| 1000 | |
||
| 37 mm | 100 | 225-25 | |
| 1000 | 225-25A | ||
| Cassette Shrink Bands, Clear | 25 mm | 1400 | 225-2510 |
| 37 mm | 100 | 225-2509 | |
| 1000 | 225-2509A | ||
| Cassette Shrink Bands, Yellow | 25 mm | 1400 | 225-2514 |
| 37 mm | 100 | ||
| 1000 | 225-2507A | ||
| Cassette Shrink Bands, Red | 37 mm | 100 | 225-2508 |
| 1000 | 225-2508A | ||
| Cassette Shrink Bands, Light Blue | 37 mm | 100 | 225-2511 |
| 1000 | 225-2511A | ||
| Cassette Shrink Bands, Orange | 37 mm | 100 | 225-2504 |
| 1000 | 225-2504A | ||
| Cassette Shrink Bands, Black | 37 mm | 1000 | 225-2515A |
Filter Accessories
| Description | Qty. | Cat. No. | |
| Sampling Labels, 8 x 8-inch sheets with 10 labels per sheet, each label includes space for sample number, date, flow, pump number., time on, and time off | 500 | 225-1370 | |
| Adapters, PVC Luer taper connects to 1/4-inch ID tubing |  |
10 | 225-13-2 |
| 250 | |||
| Filter Cassette Holder, for 25 and 37-mm cyclones |  |
1 | 225-1 |
| Tubing, Collar Clip and Cable Tie, contains
a 30-inch (76.2-cm) length of Tygon tubing and one alligator
collar clip attached to a nylon cable tie |
 |
1 | 225-13-8 |
| Collar Clip and Cable Tie only, alligator collar clip attached to a nylon cable tie |  |
10 | 225-13-6 |
| Accu-Press™, closes filter cassettes consistently and easily. Operator-adjustable closing pressure closes cassettes without risk of excessive pressure and damage and prevents bypass of air around the sampling filter as required by OSHA/NIOSH. Operates on compressed air or compressed air cylinders |  |
1 | 225-8361 |
| Aero-Chek ® Cassette Leak Tester, non-destructive and allows a quick check of cassettes for plastic-to-plastic leakage from the outside in, ideal for use in the field or in the lab |  |
1 | 225-8531 |
Cassette-Tripod Stand, telescopes
to 5 feet, holds a 25 or 37-mm cassette; |
 |
1 | |
| Replacement Tripod Fitting, end fitting for tubing in 228-502 tripod stand | 1 | P50821 | |
| Cassette-Tripod Stand, telescopes
to 5 feet, holds a BioStage Impactor; pump, tubing and BioStage not included |
 |
1 | 225-9536 |
| Multi-purpose Calibration Jar, provides convenient calibration when using a Button Sampler, GS Cyclone, PUF tube, OVS tube, the IOM, or the PEM. Instead of packaging four or five different calibration adapters for the field, pack only one Multi-purpose Calibration Jar. The rugged 32-ounce polypropylene jar contains a quick screw cap and barbed fitting for easy use. Supports 6-inch length x 3.25-inch diameter devices. |  |
1 | 225-111 |
| Large Multi-purpose Calibration Jar, supports 8-inch length x 3.25-inch diameter devices | |
1 | 225-112 |
| Helmet Adapter includes hose, tubing, leather straps, and Velcro already assembled | 1 | 225-600 | |
| SKC Universal Screwdriver Kit, for use with sample pumps, includes 3 interchangeable screwdriver heads. | 1 | 224-11 | |
| Mini Tool Kit, for use with air sampling pumps and filter media, includes scissors, pliers, file, 2 slotted screwdrivers, 2 Phillips screwdrivers, forceps, and charcoal pick |  |
1 | 376-01-01 |
| Description | Qty. | Cat. No. | |
| Filter-Keepers Many laboratories use plastic holders to transport, store, and archive filters to prevent contamination and damage. Until now, there has not been a plastic container which will prevent 37 and 25-mm filters from shifting which can cause sample loss, which can be further compromised by static charge buildup in the container. The Omega Filter-Keeper™ eliminates these problems by using a static dissipative plastic in conjunction with a clam shell design which locks the filter at the periphery while holding the filter several millimeters from any surface. |
 |
100 | 25-mm |
| 100 | 225-8303 37-mm |
||
| Filter-Keepers with 6 Archiving Trays includes labels. Each tray holds 8 filters and is pre-marked by rows (A and B) and by columns (I, II, III and IV). In addition, each tray has a label area for easy permanent identification. |  |
48 | 25-mm |
| 48 | 37-mm |
||
| Archiving Trays only, for Filter-Keeper System. Each tray holds 8 filters and is pre-marked by rows (A and B) and by columns (I, II, III and IV). In addition, each tray has a label area for easy permanent identification. |  |
6 | 225-8305 |
| Kasset-Kaddy™, provides
convenient storage for and transportation of 37-mm cassettes.
Each 10 x 10-inch tray securely holds twenty-five 37-mm cassettes. Trays fit commercially available desiccators and ovens |
 |
2 | 225-8321 |
| Jars, glass with PTFE-lined caps, for solvent extraction of filters |  |
8 | 225-8376 |
| 36 | 225-8377 | ||
| Petri Dish Slide, easily transports filters up to 47 mm in diameter, rectangular base fits most microscope stages |  |
100 | |
Filter Transport Case, conductive plastic, securely holds 25-mm filters for transport |
 |
1 | 225-67 |
| Filter Lifter, stainless steel device speeds removal of filter from cassette and prevents damage to membrane, included in Filter Handling Kit 225-8372 |  |
1 | 225-13-7 |
Sure-Seal Cassette Crowbar*, stainless steel with extended handle, opens 25 and 37-mm cassettes, included in Filter Handling Kit 225-8372 *required for SURESEAL leak-free cassettes |
 |
1 | |
Filter Handling Kit includes cassette crowbar 225-13-5A, filter lifter 225-13-7, and non-serrated flat-tip forceps 225-8371, in carry case |
 |
1 | 225-8372 |
| Flat Tip Forceps, easy-clean stainless steel with non-serrated flat tips to prevent contamination or damage of filters, included in Filter Handling Kit 225-8372 |  |
1 | 225-8371 |
| Forceps,serrated pointed tips, precision stainless steel device speeds removal of filter from cassette and prevents damage to membrane |  |
1 | |
| Forceps, non-serrated, PTFE-coated pointed tips, to eliminate interference from metal when handling filters | 1 | 225-1344 | |
MSDS Cassette Shrink Bands in Preservative Solution (PDF)
| About SKC | Terms of Use | Privacy Policy | Contact Us | Site Map | Ordering Information |
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2010 SKC Inc