EntryRAE

Personal Confined Space Entry Monitor with PID

 

• Detects CO, H₂S, LEL, O₂, and VOCs
• Includes patented self-cleaning PID
  
  
• Simple-to-operate and calibrate
  
  
• Powerful pump for sample draws up to 100 feet (30 meters)
• Low flow alarm
  
  
• Durable, weather-resistant rubber case
  
  
• Large display with auto-backlight
  
  
• Bright red flashing LED visual and loud audible alarms
  
  
• Built-in automatic datalogger
  
  
• Interchangeable lithium-ion and alkaline battery packs
  • Li-Ion: Approximately 16 hours continuous operation
  • Alkaline: Approximately 12 hours continuous operation
    
    
• Charging cradle doubles as an external battery charger
• AutoRAE-compatible for automatic calibration

EntryRAE Applications

• Refineries
• Agriculture
• Chemical processing
• Cable vaults
• Water and wastewater facilities
• Sewer entries
• Semiconductor manufacturing
• Underground storage
• Rail car and tank truck cleaning
• Resin and nylon production
  
  

EntryRAE Performance

Measuring Range (Resolution):

• VOCs — 0 to 999 ppm (1 ppm)
• Combustibles — 0 to 100% LEL (1%)
• O₂ — 0 to 30% (0.1%)
• CO₂ — 0 to 500 ppm (1 ppm)
• H₂S — 0 to 100 ppm (1 ppm)

Readout:*

• Oxygen — %Vol
• Combustibles — %LEL and %Vol
• VOCs, CO, H₂S — ppm

* TWA and STEL values are displayed for VOCs, CO, and H₂S. High and low values are displayed for all gases.

Provide a little extra protection while performing confined space tasks with the EntryRAE personal confined space entry monitor with photoionization detector (PID). EntryRAE monitors up to four gases and features a modular patented self-cleaning PID to detect VOCs. EntryRAE is reliable, simple to operate, and easy to calibrate. Only EntryRAE delivers added protection without added complexity.

The EntryRAE Advantage
In general, four-gas monitors do not detect VOCs. While VOCs are combustible, they are often found at levels below the 10% measured by LEL sensors. Yet, VOCs are commonly found in the cleaners, solvents, adhesives, and fluids found in or brought into confined spaces. The PID included in the EntryRAE can detect these low-level compounds and alert workers to exposure. The PID can also act as a reliable backup to LEL sensors, which can be poisoned by common chemicals and become unreliable.

About ProRAE Software
ProRAE Suite Software for QRAE Plus, MultiRAE Plus, and MultiRAE IR models allows download of datalogged data and configuration settings to a PC and upload of new configuration settings to the instrument.

ProRAE Studio Software provides the same functionality for QRAE II, EntryRAE, MiniRAE 3000, ppbRAE 3000, and Ultra-RAE 3000 models.

AutoRAE
Automatic Bump Test and Calibration System

• Automatic calibration, bump test, and charging
• PC-free, pushbutton easy
• Reduces need for specialized service technicians
• Monitors are always calibrated and charged
• Increases user confidence/safety

The AutoRAE single controller/cradle system can be expanded to 10 cradles. Cradles snap onto other cradles and controllers snap onto other controllers for complete scalability. AutoRAE is available for MultiRAE Plus, QRAE, QRAE Plus, MiniRAE 2000, and EntryRAE. The QRAE II partners with the new AutoRAE Lite for lower operation cost. Contact SKC for more information.

Ordering Information