Long-duration Color Detector Tubes
Direct TWA Readings
Designed for use with a personal air sampling pump, long-duration color
detector tubes are used for on-the-spot Time-Weighted Average (TWA) measurements.
The tube is attached to a worker's collar and the sample pump pulls the
air sample through the tube at a constant rate (20 ml/min) during the sampling
period. At the conclusion of the testing period, the total volume is calculated
(rate [ml/min] x time [min]). Chemical concentration is read directly from
the tube. The TWA in parts per million (ppm) is readily calculated using
the instructions that accompany the tubes.
Pump Kit for Long-duration Tube Sampling
Includes AirChek® 52 Personal
Sample Pump, low flow constant pressure controller, single charger, adjustable
low flow holder attached to a type "T" cover, trap tubes, tool kit, and carry
case.
Cat. No..................... 224-52LTK
Download Drager
price list PDF
When sampling with long-duration color detector tubes, use trap tubes to protect
the sample pump from chemicals that may be generated by the detector tube during
sampling. At least One trap tube is recommended for each long-duration tube.
The
SKC
tandem tube holder accommodates one long-duration tube and one trap tube.
Tandem Tube Holders
Tandem style for color detector tubes up to 115 mm long and a trap tube.
Cat. No..................... 224-29T
Trap Tubes
SKC trap tubes protect the sample pump from chemicals that may be generated from
a long-duration color detector tube during the sampling period. One trap tube
is recommended for each long-duration tube. Package of 10.
Cat. No..................... 222-3D-2
Contact your local SKC representative for information
on other sampling pumps for long-duration tube sampling.
This page was last modified May 17, 2005
|