SKC: Shaping the Future of Air Sampling  
 
 Español
 Deutsch
 Français
 Portuguese
 

 

 

Pac III

The Tough Single-gas Personal Monitor

Pac III Single Gas Monitor  Cat. No. 805-30010
Pac III Single Gas Monitor  Cat. No. 805-30010
Pac Approvals ATEX, CSA, EX, MSHA CE UL
  • Rugged instrument
    • Robust chrome-plated polymer housing
    • Water, dust, impact, cold, and heat resistant
    • Superior resistance to RFI

  • Two levels of audible and visual alarms

  • 30 intelligent electrochemical sensors
    • Change sensors quickly and easily
    • Fast, accurate response to targeted gases and vapors

  • Small and lightweight
    • Wear on belt, lapel, or in shirt pocket

  • Easy 3-button operation

  • Large backlit display

  • Menu-driven functions protected by pass code

  • UL Listed for combustible dusts, flammable gases and vapors

Tough, loud, bright, and smart, the Dräger Pac® III is one of the most versatile single-gas monitors available. Its rugged housing withstands impact, heat, cold, water, and dust and provides superior RFI resistance. Alarms are the loudest and brightest with all alarms and warnings announced with audible and visual signals and a display message or character. Using one of 30 intelligent DrägerSensors, Pac III detects and compares the current gas level against pre-configured alarm values. Sensors can be interchanged quickly allowing one instrument to be configured for several different workers and applications. The Pac III is easy to operate from its simple three-button keypad. Functions are adjustable using easy-to-read menus and are protected by pass code. The battery-powered Pac III operates for 600 hours on one alkaline battery. Pac III is UL Listed for flammable gases/vapors and combustible dusts and has received approvals from CSA, MSHA, EX, and ATEX; CE marked.

Pac III Alarm
Loudest
Horn 95 dBA at 1-ft distance
Pac II Alarm Light
Brightest
Alarm light enhances viewability
Pac III LCD
Largest
Backlit graphics display


Ordering Information  
Each monitor includes a 9-V alkaline battery, Allen tool, belt clip, and operating instructions. Sensors are required, but not included. (See listing below) NiMH batteries and chargers are also available for Pac III.
Description Cat. No.

Pac III Monitor, requires sensor

Requires calibration using appropriate calibration gas(es) and equipment sold separately

805-30010

Pac III Datalogging Hygiene Monitor Kit, requires sensor and software kit

Requires calibration using appropriate calibration gas(es) and equipment sold separately

805-30011

Pac III Deluxe Datalogging Hygiene Monitor Kit includes monitor, software kit, leather pouch, and carry case, requires sensor

Requires calibration using appropriate calibration gas(es) and equipment sold separately

805-30311
Software Kit for Hygiene Monitor includes GasVision Software, download module, cable, and 110-V power adapter 805-300PAC
Carry Case, leather, with shoulder strap for Pac III 805-30054
Sensors are required, but not included. (See the DrägerSensor Selection Guide)
Calibration Adapter, required 805-06291

Pac III Hygiene Monitor

Available for applications that require documentation and calculation of exposure for TWA, STEL, or ceiling values, the Pac III Hygiene Monitor records and stores in excess of 125 hours of gas exposure at one-minute intervals.

For more information, contact your SKC representative.

E-Cal Station

Calibrating Dräger gas detection instruments is now as easy as "point and click." The Dräger E-Cal Station opens gas cylinders and delivers the calibration gas to 1 to 10 Dräger gas detection instruments, reads the concentration, makes the appropriate adjustments, documents the procedure, and exhausts the gas. Ten instruments can be calibrated and completely documented in less than 15 minutes total. The E-Cal system is a very valuable instrument management and productivity tool.

For more information, contact your SKC representative.

XS Sensors

Dräger replacement XS sensors for Pac III, MiniWarn, Multiwarn II, and X-am 7000 monitors

Chemical
Range
Warranty
Replacement
Cat. No.
Amines
0-100 ppm
1 year
Ammonia
0-200 ppm
1 year
Carbon dioxide
0-5.0 Vol. %
1 year
Carbon monoxide
0-2000 ppm
3 years
Carbon monoxide HC
(high concentration)
0-10,000 ppm
1 year
Chlorine
0-20 ppm
1 year
Chlorine dioxide
0-20 ppm
1 year
Hydrazine
(Pac III only, disposable sensor)
0-3.0 ppm
1 year
Hydrazine  
(Pac III only, disposable sensor)
0-3.0 ppm
6 mos.
Hydrides
(phosphine, etc.)
0-20 ppm
1 year
Hydrogen
0-2000 ppm
1 year
Hydrogen HC
(high concentration)
0-4 Vol. %
1 year
Hydrogen cyanide
0-50 ppm
1 year
Hydrogen fluoride
/Hydrogen chloride
(Pac III only, disposable sensor)
0-30 ppm
1 year

Hydrogen peroxide
(Pac III only, disposable sensor)

0-20 ppm
1 year
Hydrogen sulfide
0-100 ppm
3 years

Hydrogen sulfide HC
(high concentration)

0-1000 ppm
18 mos.
Hydrogen sulfide XS-2 SR
0-100 ppm
1 year
Nitric oxide
0-100 ppm
2 years
Nitrogen dioxide
0-50 ppm
2 years
Odorant
(mercaptan)
0-40 ppm
1 year
Organic vapors OV
0-200 ppm
1 year
Organic vapors OVA
0-200 ppm
1 year
Oxygen
0-25 Vol. %
3 years
Oxygen
0-100 Vol. %
1 year
Phosgene
0-3 ppm
9 mos.
Phosphine HC
(high concentration)
0-1000 ppm
1 year
Sulfur dioxide
0-100 ppm
2 years

ABOUT Dräger XS Sensors
For extra stability, use interchangeable user-replaceable electrochemical XS sensors for the Pac III, MiniWarn, and X-am 7000 gas monitors to measure over 50 different gases and vapors. Dräger XS sensors feature built-in gas-specific intelligence, superior temperature stability, pressure compensation, minimum cross-sensitivity to background gases, and constant validation of sensor performance. These sensors require less frequent calibration compared to other electrochemical sensors. Calibrated XS sensors can be transferred from unit to unit without recalibration. Carbon monoxide, hydrogen sulfide, and oxygen (0 to 25 Vol. %) versions of the XS sensors carry a three-year warranty and only require annual recalibration.

 

Dräger XS-R Sensors

The latest generation of intelligent electrochemical DrägerSensors offer all the technical advantages of the XS sensors, but feature a 5-year warranty. Available for CO, H2S, and O2, they are compatible with the Pac III, MiniWarn, Multiwarn II, and X-am 7000 monitors.

Replacement XS-R Sensors

All the technological advantages of XS Sensors with a 5-year warranty, for Pac III, MiniWarn, Multiwarn II, and X-am 7000
Chemical
Range
Warranty
Replacement
Cat. No.
Carbon monoxide
0-2000 ppm
5 years
Hydrogen sulfide
0-100 ppm
5 years
Oxygen
0-25 Vol. %
5 years

Dräger XS-2 Sensors

The new XS-2 family of CO, H2S, and O2 electrochemical DrägerSensors offer:

  • Complete compatibility and interchangeability with Pac III, Miniwarn, Multiwarn II, and X-am 7000
  • 2-year warranty, even for O2
  • Economy
Economical intelligent sensors with at 2-year warranty, for Pac III, MiniWarn, Multiwarn II, and X-am 7000
Chemical
Range
Warranty
Cat. No.
Carbon monoxide
0-2000 ppm
2 years
Hydrogen sulfide
0-100 ppm
2 years
Oxygen
0-25 Vol. %
2 years

DrägerSensor Selection Guide

 


This page was last modified September 10, 2007
  About SKC Terms of Use Privacy Policy Contact Us Ordering Information

This site was last modified May 12, 2008

SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2008 SKC Inc