Sorbent Tube Accessories
Adjustable Low Flow Tube Holders
These tube holders allow higher flow pumps to sample in the 5 to 500
ml/min flow range, and provide for multiple tube sampling. Flow rate
can be adjusted using the convenient flow adjust screw on the holder.
| Adjustable Low Flow Tube Holder Type |
Cat. No. |
Single Adjustable Low Flow Holders, 5
to 500 ml/min
Require plastic protective covers below |
|
224-26-01 |
Dual Adjustable Low Flow Holders, 5
to 500 ml/min
Require plastic protective covers below |
 |
224-26-02 |
Tri Adjustable Low Flow Holders, 5
to 500 ml/min
Require plastic protective covers below |
 |
224-26-03 |
Quad Adjustable Low Flow Holders, 5
to 500 ml/min
Require plastic protective covers below |
 |
224-26-04 |
Adjustable
Low Flow Tube Holders Operating
Instructions (PDF)
Plastic Protective Covers
Sorbent sample tubes size determines protective cover size. Collar clips are
attached to the plastic tube cover for your convenience. Sample tubes sizes and
recommended
covers
can
be found on the sorbent tube pages. Protective covers require low flow holders
above. Tube covers A to D are for use with SKC adjustable low flow holders
only.
| Description |
Cat. No. |
| A - for tubes 6-mm OD x 70-mm length |
 |
224-29A |
| B - for tubes 8-mm OD x 110-mm length |
|
224-29B |
| C - for tubes 10-mm OD x 150-mm length |
|
224-29C |
| D - for tubes 10-mm OD x 220-mm length |
|
224-29D |
| T - Tandem style for color detector tubes up to 115-mm length
and a trap tube |
 |
224-29T |
| V - OVS tubes, do not use adjustable low flow holders |
 |
224-29V |
Constant Pressure Controllers (CPC)
When using the following pumps for low flow applications, use a CPC with an adjustable
low flow holder (above).
| Pump Model |
Cat. No. |
AirChek 2000, AirChek XR5000, and
AirChek 52
CPC Operating Instructions PDF |
 |
224-26-CPC |
Pocket Pump and AirLite
CPC Operating Instructions PDF |
|
224-26CPC-10 |
Low Flow (5 to 500 ml/min Adapter Kits)
Includes Constant Pressure Controller (CPC), single Adjustable Low Flow Holder,
and Type A tube cover
| Description |
Cat. No. |
AirLite Kit, includes a constant pressure
controller r (#224-26CPC-10), single adjustable low flow
holder (#224-26-01),
type A protective
tube cover.(#224-29A).
|
 |
|
| AirChek 52, AirChek XR5000, and AirChek 2000, Includes
constant pressure controller (#224-26-CPC), single adjustable low flow
holder (224-26-01), and type A protective
tube cover (#224-29A). |
|
|
Low Flow Tube Holder with Plastic Cover For 222 Series and Pocket
Pumps
SKC Sample tubes – the most widely used in the industry – assure
a positive seal between the sample pump and the sample tube. These all-in-one
holders each include a holder with tubing and an lightweight protective
plastic tube cover with collar clip. Choose the appropriate holder by
matching the tube cover letter in the sorbent tube pages with the cover
letter in
the table below. Use these plastic holders with the Pocket Pump and 222
Series pumps only. |
 |
Plastic Cover |
Tube Specifications |
Cat. No. |
A |
standard 6-mm OD x 70-mm length |
222-3-1 |
B |
7 or 8-mm OD x 110-mm length |
222-3L-1 |
C |
10-mm OD x 150-mm length |
222-3XL-1 |
D |
10-mm OD x 220-mm length and shorter tubes |
222-3XD-1 |
MiniPass personal air sampling media holder
MiniPass provides
the comfort of a traditional headset with the benefit of holding media at
the heart of the breathing zone for accurate measurements. MiniPass features
dual
flexible sampling arms for parallel simultaneous samples and allows measurements
inside personal protective equipment such as masks and helmets. Simply attach
media to the adapters on the sampling arms. Attach pump tubing to the outlet
adapters and the free end of the tubing to a sample pump. Passive samplers
may also be clipped to the sampling arms.
| Description |
Cat. No.
|
| MiniPass Sampling Media Holder includes headset with 2
flexible sampling arms, 4 hose connectors, 2 Luer plugs, and 2 Luer connectors |
 |
|
Accessories
| Description |
Cat. No. |
| Breaker/Capper, stainless steel Size S, 6 and 7-mm
OD tubes |
 |
222-3-50 |
| Breaker/Capper, stainless steel Size L, 8 and 10-mm
OD tubes |
 |
222-3-51 |
| Tube Scorer/Breaker, for 6-mm OD tubes;
scores and breaks end tips off glass tubes leaving a clean, smooth opening |
 |
800-01200 |
| Quality file, for Tips |
P222318 |
| Charcoal Pick |
222-3-20 |
Tubing/Adapter Kit for Calibration of OVS Tubes
|
| This new kit contains two sections of tubing and a tubing
adapter to facilitate calibration of a sample pump when using an OVS Sorbent
Tube.
OVS Tubing/Adapter Kit includes 2 sections of tubing and tubing adapter
|
OVS Tubing/Adapter Kit
Cat. No.........................................224-31
|
Tubing Available in
Tygon, Latex Rubber, PTFE, and Polyurethane
This page was last modified April 28, 2009
|
