Special AIHCE pricing! Click here

AirChek XR5000

Designed for Xtended Range to 5000 ml/min
Xtended Run with Li-Ion Batteries
Xtra Easy Operation
Xtra Back Pressure Compensation
Supercharged Battery Power

Li-ion models

AirChek XR5000 Operating Instructions (PDF)

AirChek XR5000 Quick Guide (PDF)

AirChek XR5000 Spec. Sheet (PDF)

SKC AirChek XR5000 Air Sampling Pumps CE Conformity Declaration (PDF)

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

Li-Ion Battery Pack for AirChek XR5000 Sample Pumps Operating Instructions (PDF)

MSDS for Lithium-Ion Rechargeable Battery (PDF)

Alkaline Battery Pack for AirChek XR5000 Sample Pumps Operating Instructions (PDF)

Take Charge 5 Li-Ion Battery Charger Operating Instructions (PDF)

AirChek XR 5000 Series UL Certificate (PDF)

Chinese Language AirChek XR5000 Operating Instructions (PDF)

Extended flow range: 5 to 5000 ml/min (5 to 500 ml/min with Low Flow Adapter Kit)

Suitable for low flow gas/vapor or high flow particulate sampling

Extended back pressure capabilities

Up to 50 inches of water at 2 L/min

Enhanced battery power for extended run times*

XR5000 Model	2 L/min	5 L/min
High-power Li-Ion	40 hrs	22 hrs
Standard Li-Ion	20 hrs	11 hrs
Alkaline	18 hrs	8 hrs

* Results of run time test, using 37-mm, 0.8-µm MCE filters

For extended run times, the pump may be operated while attached to the charger.

3 interchangeable battery options

High-power Li-Ion for extended runs
Standard Li-Ion for lighter weight
Disposable AA alkaline batteries for fast emergency response

Patented** highly accurate isothermal flow control system

Compensates with ± 5% accuracy

UL Listed for intrinsic safety (Li-Ion models only)

Automatic flow correction for changes in temperature provides accurate air volumes
Extremely simple operation

Easy-to-use three-button keypad
Continuous run with the push of a button
Bright blue pump status LED
Easy-to-read LCD displays elapsed time and accumulated run time

Set-and-go timer

Timed and delayed runs up to 9999 minutes

Sample Integrity

Lockable keypad
Automatic flow fault
Auto-restart attempted after 15 seconds in flow fault
Flow correction for changes in temperature
Accumulated run time display
Battery status indicator

Standard model weighs only 16 ounces (454 grams)

CE marked

RoHS compliant
Components meet Euro directive for reduction of hazardous substances (including lead) to support green initiatives

** U.S. Patent No. 5,892,160

Performance Profile

Flow Range

1000 to 5000 ml/min (5 to 500 ml/min requires optional low flow adapter kit)

Compensation Range

5000 ml/min at 10 inches water back pressure
4000 ml/min at 20 inches water back pressure
2000 ml/min at 50 inches water back pressure

Typical Back Pressure of Sampling Media (inches water)

Flow Rate (L/min)	1.0	1.5	2.0	2.5	3.0	3.5	4.0	5.0
Filter/Pore Size (µm)
25-mm MCE/0.8	6	9	12	15	18	21	25	31
25-mm MCE/0.45	14	22	28	35	40	44	50	63
37-mm MCE/0.8	2	3	4	5	6	7	9	11
37-mm PVC/5.0	1	1	2	2	2.5	3	3	4
37-mm polycarbonate/0.45	4	6	8	10	12	15	17	21
25-mm MCE/0.45 microvacuum	21	31	40	48	59	69	79	100
37-mm PTFE/1.0	7.5	11	14.5	19	22	26	30	40

Compare the information in this table to pump compensation range to determine appropriate applications.

Flow Compensation System

Patented isothermal closed loop flow sensor
(U.S. Patent No. 5,892,160)

Accuracies

Timing: 1 min/mo at 25 C
Flow Rate: ± 5% of set-point after calibration to desired flow

Battery Charge Level Indicator

Icon displays on LCD at full, mid, low charge, imminent low battery fault, and low battery fault.

Temperature Range

Operating: 32 to 113 F (0 to 45 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 95 F (-20 to 35 C)

Typical Run Times

XR5000 Model

2 L/min

5 L/min

High-power Li-Ion

40 hrs

22 hrs

Standard Li-Ion

20 hrs

11 hrs

Alkaline

18 hrs

8 hrs

Timer Display Range

1 to 9999 minutes (6.8 days). If run time exceeds 6.8 days, timer display rolls over.

Flow Fault

If pump is unable to compensate for > 15 seconds due to excessive back pressure, the pump stops and holds run time display. Auto-restart is attempted every 15 seconds up to 5 times.

Low Battery Fault

15 sec to sleep

Auto-off

5 min of inactivity

Battery Pack
(model dependent)

High-power Li-Ion (4 cell), rechargeable, 7.4 V, 4.4 Ah, 32.6 Wh capacity
or
Standard Li-Ion (2 cell), rechargeable, 7.4 V, 2.2 Ah, 16.3 Wh capacity
or
Alkaline (6 cell), disposable, size AA, 1.5 V (nominal)

Battery Recharge Time
(with SKC-approved charger)

Standard Li-Ion (2 cell): approximately 4 hrs
High-power Li-Ion (4 cell): approximately 8 hrs

Size

High-power Li-Ion and alkaline models: 5.5 x 3 x 2.3 in (14 x 7.6 x 5.8 cm)
Standard Li-Ion model: 4.3 x 3 x 2.3 in (10.9 x 7.6 x 5.8 cm)

Weight

High-power Li-Ion model: 21 oz (0.6 kg)
Standard Li-Ion model: 16 oz (0.45 kg)
Alkaline model: 17 oz (0.48 kg)

Case

Anti-static plastic

RFI/EMI Shielding

CE marked for RFI/EMI protection

Approvals

for use in hazardous locations. Models that are UL Listed for intrinsic safety contain the logo on the label. These models must be used with battery pack Cat. No. P85004 or P85002 to maintain the UL intrinsic safety listing.

RoHS compliant

Ordering Information

AirChek® XR5000 with High-power Li-Ion*

Description		Cat. No.
Pump with battery, requires charger, see kits or charger below		210-5001
Single Pump Kit includes pump, charger, cassette holder, and soft-side nylon carry case	100-240 V	210-5001K
Single Pump Starter Kit includes pump with battery, charger, Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie	100-240 V	210-5001-S
5-pack High Flow Pump Kit includes 5 pumps and cassette holders and 5-station charger, in a Pelican case	100-240 V	210-5001K5
5-pack High/Low Flow Pump Kit includes 5 pumps, cassette holders, adjustable low flow holders, constant pressure controllers, and Type A tube covers and 5-station charger, in a Pelican case	100-240 V	210-5001K5D
Battery Packs
Replacement Battery Pack, SKC Li-Ion high-power 4-cell replacement battery pack for AirChek XR5000 pump, UL Listed for intrinsic safety		P85004

Certificate of Compliance, optional, must be ordered when ordering pump		P1501

*	AirChek XR5000 pumps with Li-Ion batteries may be subject to special shipping regulations.

AirChek XR5000 with Standard Li-Ion*

Description		Cat. No.
Pump with battery, requires charger, see kits or charger below		210-5002
Single Pump Kit includes pump, charger, cassette holder, and soft-side nylon carry case	100-240 V	210-5002K
Single Pump Starter Kit includes pump with battery, charger, Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie	100-240 V	210-5002-S
5-pack High Flow Pump Kit includes 5 pumps and cassette holders and 5-station charger, in a Pelican case	100-240 V	210-5002K5
5-pack High/Low Flow Pump Kit includes 5 pumps, cassette holders, adjustable low flow holders, constant pressure controllers, and Type A tube covers and 5-station charger, in a Pelican case	100-240 V	210-5002K5D
Battery Packs
Replacement Battery Pack, SKC Li-Ion standard 2-cell replacement battery pack for AirChek XR5000 pump, UL Listed for intrinsic safety		P85002
Pump Certificate
Certificate of Compliance, optional, must be ordered when ordering pump		P1501

AirChek XR5000 with Alkaline^† — Not UL Listed

Description	Cat. No.
Pump with 6 AA-size batteries	210-5003
5-pack High Flow Pump Kit includes 5 pumps and cassette holders, in a Pelican case	210-5003K5
5-pack High/Low Flow Pump Kit includes 5 pumps, cassette holders, adjustable low flow tube holders, constant pressure controllers, and Type A tube covers, in a Pelican case	210-5003K5D
Battery Packs
Replacement Battery Pack, SKC alkaline 6-cell (size AA) replacement battery pack for AirChek XR5000 pump, non-UL Listed for intrinsic safety	P75715
Pump Certificate
Certificate of Compliance, optional, must be ordered when ordering pump	P1501

†	Alkaline model pumps and kits do not include or require a charger.

AirChek XR5000 Without Battery Pack

Description	Cat. No.
SKC Pump only, battery pack not included, charger not included. When attached to an XR5000 high-power Li-Ion battery pack (P85004) or a standard Li-Ion battery pack (P85002), this pump is UL Listed for intrinsic safety. When attached to an alkaline battery pack (P75715), it is non-UL Listed. Low flows from 5 to 500 ml/min require a low flow adapter kit.	210-5000NB
Pump Certificate
Certificate of Compliance, optional, must be ordered when ordering pump	P1501

AirChek XR5000 Accessories

Calibrators and Accessories		Cat. No.
Defender Primary Standard Calibrator, 5 to 500 ml/min, includes lead-acid battery, charger, Optimizer software, and 39-inch (1-meter) serial cable. Software requires Windows XP (SP 2 or 3) or Windows Vista (32 bit version) and an RS-232 port or USB to RS-232 adapter.		717-510L
Defender Primary Standard Calibrator, 50 to 5000 ml/min, includes lead-acid battery, multi-plug charger (100-240 V), Optimizer software, and 39-inch (1-meter) serial cable. Software requires Windows XP (SP 2 or 3) or Windows Vista (32 bit version) and an RS-232 port or USB to RS-232 adapter.		717-510M
Replacement Defender Lead-acid Battery Pack		717-506
Defender Universal Charger, 100-240 V, with U.S., Euro, and Australia plugs		717-509
Defender Universal Charger, 100-240 V, with U.S. plug		717-507
Chargers and Accessories
Single Pump Charger for XR5000 and Leland Legacy includes charging unit and wall cube (100-240 V worldwide power input with interchangeable plugs included)		223-241
Take Charge 5 for XR5000 and Leland Legacy, 5-station charger for Li-Ion batteries (100-240 V) Use in non-explosive locations only; not UL Listed for intrinsic safety		223-441
Single Wall Cube/Power Supply, 100-240 V, with multiple plugs; included as part of the 223-241 Charging Kit		223-245
Li-Ion Charging Unit, 100-240V, included as part of the Leland Legacy and AirChek XR5000 Charging Kit, 223-241 Note: Must be used in conjunction with the 223-245 Wall Cube Charger/Power Supply		P22300
Replacement Li-Ion Battery Charging Unit Cable, for charger 223-241		P75632
Protective Pouches
Black, nylon, with belt, adjustable waist, and shoulder strap suitable for high-power Li-Ion and alkaline XR5000 models		224-88
High-profile red, nylon, with belt, adjustable waist, and shoulder strap, suitable for high-power Li-Ion and alkaline XR5000 models		224-96A
Black, noise-reducing, nylon, with belt, adjustable waist, and shoulder strap, suitable for high-power Li-Ion and alkaline XR5000 models		224-96C
Black, noise-reducing, nylon, with belt, adjustable waist, and shoulder strap, for standard model		224-913
Kit Case: Single Deluxe Case (Pelican), for SKC pumps. Foam-filled case is watertight, airtight, dustproof, and crushproof; will accommodate a single pump and accessories		224-901
5-Pack Pump Carry Case (Pelican), for AirChek XR5000, AirChek 2000, AirChek 52, and AirLite pumps; on wheels for easy transport, watertight, airtight, dustproof, and crushproof, equipped with foam for complete equipment protection		224-907
Sampling Accessories, Replacement Parts and Tools
Low Flow Adapter Kit (5 to 500 ml/min) includes constant pressure controller, single adjustable low flow holder, and Type A tube cover, suitable for all XR5000 models		210-500
Replacement XR5000 Case		P21451
Replacement XR5000 Battery Pack Cover		P20419
Replacement XR5000 Alkaline Battery Pack Fuse, pk/2		P76222
AirChek XR5000 Keypad		P79365
AirChek XR5000 Base Plate		P20418
Replacement XR5000 PCB (control board)		P79566
Replacement XR5000 Top Valve Assembly		P21326
Replacement Diaphragm/Yoke Assembly		P22417HC
Replacement Filter/O-ring, pk/3		P20140
Replacement Inlet/Filter Housing		P20142
Replacement Pump Stack Without Motor		P21253
SKC Pneumatic Test Kit, for testing flow compensation in personal sample pumps, 1 to 5 L/min rotameter, 0 to 80 inches magnehelic pressure gauge		224-6580
SKC Universal Screwdriver Kit, for use with sample pumps, includes 3 interchangeable screwdriver heads		224-11
Mini Tool Kit, for use with air sampling pumps and filter media, includes scissors, pliers, file, 2 slotted screwdrivers, 2 Phillips screwdrivers, forceps, and charcoal pick		376-01-01

Li-Ion Battery Shipment
Rechargeable lithium-ion batteries for use with SKC sample pumps have been tested in accordance with the UN Manual and are proven to meet requirements of each test in the UN Manual of Test Criteria, Part III, subsection 38.3. They have a watt-hour (Wh) rating below 100.

Per 2010 IATA regulations, packaging must meet the specifications of and contain labeling and documentation required by IATA Packing Instructions 965, 966, and 967. See IATA Guidance
Document: Transport of Lithium Metal and Lithium Ion Batteries, Revised for the 2010 Regulations