SKC: Shaping the Future of Air Sampling  
 
 Español
 Deutsch
 Français
 Portuguese
 

 

 

Low Flow Pump 222 Series

The Low Flow Sample Pump Workhorse
for Sorbent and Long-duration Color Tube Sampling

Ordering Info

Low Flow Pump 222-3
Low Flow Pump 222-3
CE Mark, UL Listed

222 Series Operating Instructions (PDF)

UL Certificate of Compliance

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

MSDS for Nickel-cadmium Battery

 

Features

  • Reliable for STEL, Ceiling, and TWA sampling

  • Up to ten hours of continuous sampling on a single battery charge

  • Maintains constant sampling rate

  • Exhaust port for bag sampling

  • Adjustable flow rate control

  • Compact and lightweight – 5.1 x 2.5 x 1.25 in (13 x 6.4 x 3.2 cm), 12 oz (340 gm)

  • Tamper-resistant control cover

  • Simple to use and easy to repair

  • Recessed controls for use with or without cover

  • UL Listed for intrinsic safety; Class I, Groups A, B, C, and D. CE marked

  • Durable, shock-resistant case includes rugged belt clip

The SKC 222 low flow sample pumps have long been recognized as the most dependable and durable pumps in the industry. These miniature diaphragm-type pumps are ideal for on-worker or area sampling of gases and vapors in air. Using reliable stroke counter technology, the 222 low flow pumps offer both a suction port for sorbent tubes and a pressure port for sample bags. SKC sample pumps have special patented valves that close positively; this is important because the heart of any pump is its valves. With over 35 years of use in the industry, the 222 low flow pumps have demonstrated their reliability.

Performance Profile
Flow Rate

222-3: 50 to 200 ml/min
222-4: 20 to 80 ml/min

Operation Time 10 hrs on one battery charge
Battery Rechargeable NiCad, 2.4 V
Caution: Intrinsic safety is invalid without an SKC-approved battery
Charge Time
(varies with capacity and level of charge):
6 to 8.5 hours. with PowerFlex charger
Battery Regulator Regulator holds voltage constant
Counter Readout Digital readout of pump strokes up to 6 digits
Valves Zero-leak valves
Pumping Action Diaphragm
Operating Temperature 32 to 113 F (0 to 45 C)
Charging Temperature 32 to 113 F (0 to 45 C)
Storage Temperature -4 to 113 F (-20 to 45 C)
Case Sturdy, lightweight plastic
Dimensions 5.1 x 2.5 x 1.25 in (13 x 6.4 x 3.2 cm)
Weight 12 oz (340 gm)
Approvals UL Listed for intrinsic safety; Class I, Groups A, B, C, and D
CE marked

Protect sample pump from weather when in use outdoors.

Intrinsic safety and other approvals may be void if SKC pumps are not repaired by SKC or authorized SKC repair centers. In addition, replacing parts with non-SKC parts can void intrinsic safety approvals and the manufacturer warranty.


Ordering Information

Description and Applications Cat. No.
Pump Only, 50 to 200 ml/min, for use with sample bags or sorbent tubes, requires charger, see kits or accessories below 222-3
Pump Only, 20 to 80 ml/min, for use with sample bags, sorbent tubes, or long-duration color detector tubes, requires charger, see kits or accessories below 222-4
Pump with Charger, 50 to 200 ml/min, with single 100-240 V charger
100-240 V
222-3KC
Single Pump Kit, 50 to 200 ml/min, include low flow sample pump, Type A tube holder, single charger with cable, and a soft-side nylon carry case
100-240 V
222-3DK
Single Pump Kit, 20 to 80 ml/min, include low flow sample pump, Type A tube holder, single charger with cable, and a soft-side nylon carry case
100-240 V
222-4DK
Five-pack Pump Kit, 50 to 200 ml/min, include 5 low flow sample pumps and Type A tube holders, one 5-station charger with cables, and a heavy-duty case
100-240 V
222-3DK5
Five-pack Pump Kit, 20 to 80 ml/min, include 5 low flow sample pumps and Type A tube holders, one 5-station charger with cables, and a heavy-duty case
100-240 V
222-4DK5
Pump Certificate
Cat. No.
Certificate of Compliance, optional, must be ordered when ordering pump P1501
Calibrator
Cat. No.
Portable Flowmeter Kit, 5 to 500 ml/min flow range includes precision glass buret, film solution, operating instructions, and carry case Portable Flowmeter Kit, 5 to 500 ml flowrange 303
Chargers — PowerFlex Charging Systems
Cat. No.
PowerFlex 5-station 100-240 V includes power supply and cord
Purchase pump-specific cables separately; choose from the list below.
For U.S.-produced pump models only, not compatible with EX and ATEX-approved models
223-1000
PowerFlex Single 100-240 V includes power supply and cord
Purchase pump-specific cables separately; choose from the list below.
For U.S.-produced pump models only, not compatible with EX and ATEX-approved models
223-2000
Replacement CE-marked Power Supply for 5-station PowerFlex Charger P22310
PowerFlex Cables
Cat. No.
222 Low Flow,1 cable
Replacement Pump Battery and Tools Cat. No.
Replacement NiCad Battery Pack
Replacing batteries with non-approved battery packs voids the pump warranty and UL intrinsic safety approvals.
222-3SR-04
SKC Universal Screwdriver Kit for use with sample pumps. Includes 3 interchangeable screwdriver heads. 224-11
SKC Pneumatic Test Kit, for testing flow compensation in personal sample pumps, 1 to 5 L/min rotameter, 0 to 80 inches magnehelic pressure gauge.

222 Series Operating Instructions (PDF)

UL Certificate of Compliance

Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)

MSDS for Nickel-cadmium Battery


SKC Air Sampling Pumps

Pump Accessories (Chargers, Calibrators, Flowmeters)


This page was last modified June 16, 2009
  About SKC Terms of Use Privacy Policy Contact Us Ordering Information

This site was last modified July 2, 2009

SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2009 SKC Inc