 |
|||||||||||
 |
 |
 |
 |
 |
 |
||||||
| |
|||||||||||
Chromosorb® Sorbent Tubes
| Sorbent (Coating) | Catalog Number | Size (mm) ODxLength | Sections | Sorbent (mg) | Ends | Tube Cover | Separators | Qty. |
|
|
| 8x110 | 2 | 100/50 | GS | B | WWW | 50 |
|
|
| 8x110 | 2 | 200/100 | GS | B | WWW | 20 |
|
|
| 8x70 | 2 | 100/50 | GO | B | WWW | 50 |
|
|
| 6x70 | 2 | 66/33 | GS | A | WWW | 50 |
|
Chromosorb 102 2 tubes |
|
6x70 6x70 |
1 1 |
100 50 |
GS GS | C |
WW WW |
50 sets |
|
|
| 1/4x3-1/2 in | 1 | 220 | GO | B | WW | ea |
|
|
| 1/4x3-1/2 in | 1 | 350 | SS | B | SWWS | ea |
|
|
| 10x150 | 2 | 600/300 | GS | C | WWW | 10 |
|
|
| 7x70 | 2 | 100/50 | GS | B | WWW | 50 |
|
|
| 6x70 | 2 | 75/37 | GS | A | WWW | 50 |
Back to the Sorbent Tube List by Sorbent Page
Catalog Number: |
|
| * : | Limited shelf-life; contact SKC for more information |
| ‡ : | Tubes are chemically conditioned before shipping; use within 30 days
or recondition. Restocking fee applies. |
| § : | Each tube has a flow direction arrow and unique number. |
| • : | Limited shelf-life; refrigerator/freezer storage may be required. Contact
SKC for more information. |
Tube Ends: |
|
| GS: | Glass Sealed |
| GO: | Glass Open |
| SS: | Stainless Steel Open |
Protective Tube Covers: |
|
| A: | 6-mm OD x 70-mm length
|
| B: | 8-mm OD x 110-mm length |
| C: | 10-mm OD x 150-mm length |
| D: | 10-mm OD x 220-mm length and shorter tubes |
| P: | Low-volume PUF Tube Holder Do not use an adjustable low flow holder |
| V: | OVS Tube Holder Do not use an adjustable low flow holder |
| Separators: |
|
| W: | Glass Wool |
| G: | Glass Fiber Filter |
| F: | Foam |
| N: | Nylon Ring |
| Q: | Quartz Filter |
| R: | Glass Spacer |
| S: | Screen |
| T: | PTFE Ring |
| Sorbent Equivalencies: | |
| Anasorb 708 is equivalent to Chromosorb 108. | |
| Anasorb 727 is equivalent to Chromosorb 106. | |
| Anasorb 747 is an SKC proprietary sorbent. | |
| Anasorb C300 is equivalent to Hydrar, Carulite. | |
| Anasorb CSC is an SKC proprietary sorbent. | |
| Anasorb GCB1 is equivalent to Carbotrap B (20/40), Carbopack B (60/80). | |
|
Trademarks: |
|
| Anasorb ® — SKC Inc | |
| Chromosorb ® — Manville Corp. | |
| Porapak ® — Waters Associates, Inc. | |
| Tenax ® — Buchem B.V. | |
| XAD ® — Rohm & Haas | |
Methods for SKC Sorbent Tubes
Search for methods for a particular SKC sorbent tube.
Sorbent Tube FAQs
Sorbent Tube Certificates of Quality/Operating Instructions
Sorbent Certificates of Analysis
For the catalog number of the correct tube for a particular chemical hazard, refer to SKC's:
- Guide to NIOSH, OSHA, and ASTM Air Sampling Methods
- Guide to EPA Air Sampling Standards
- Guide to HSE Air Sampling Standards
Search for methods for a particular SKC sorbent tube.
Custom Tubes Available
For specific applications, SKC will manufacture custom sorbent tubes to meet your specific requirements. Download the applicable Custom Sorbent Tube Order Form in PDF format. Complete the form and fax it to your SKC representative, contact your SKC representative, or call the SKC Sales Department at 724-941-9701 for more information.
Custom Sorbent Tube Order Forms
| About SKC | Terms of Use | Privacy Policy | Contact Us | Site Map | Ordering Information |
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2012 SKC Inc