Custom Search
...
|
![]() SKC Expert Knowledge--Always Available×
Need help selecting a method and media? See SKC Sampling Guides:
SKC Environmental Air Sampling Guide SKC Guide to OSHA/NIOSH/ASTM Air Sampling Methods SKC Passive Sampling Guide SKC HSE Sampling Guide Need help with hazard assessment for various industries and health concerns? See SKC Sampling Solutions Need help setting up your sampling media for calibration and collection? See SKC Sample Setup Guides Need comprehensive review of air sampling topics? See SKC Presentations: Webinars Presentations Videos
×
...
|
![]() | The Grab Air fixed flow (1 L/min) economical area sample pump uses a 9-volt alkaline battery for sampling gases/vapors. The pump is ideal for use with sample bags. Not UL Listed for intrinsic safety |
Flow Rate | Approx. 1 L/min |
Operation Time | Approx. 1000 liters volume per battery dependent on battery quality |
Battery | Disposable 9-V alkaline |
Pumping Action | Diaphragm |
Case | Sturdy, lightweight plastic |
Intrinsic Safety | Not intended for use in explosive or hazardous locations |
Dimensions | 4.25 x 2.5 x 1.1 inches (10.8 x 6.3 x 2.7 cm) |
Weight | 6.6 ounces (186 grams) |
Protect sample pump from weather when in use outdoors.
The SKC Grab Air Sample Pump is an economical choice for grab-and-go
bag sampling. Grab Air operates at a fixed flow rate of 1 L/min for up
to 1000 liters volume on one 9-volt battery. Simply attach a sample bag
to the outlet port and turn on the pump. Simple, quick, economical — Grab
Air.
Principle of Operation
The Grab Air Sampler pulls air containing the sample into the pump at approximately
1 L/min and immediately exhausts it into a sample bag connected to the pump
with PTFE tubing. Sampling is complete
when the bag is properly filled. See
Bag Sampling.
Sampling Tips