Custom Search
...
|
![]() SKC Expert Knowledge--Always Available×
Need help selecting a method and media? See SKC Sampling Guides:
SKC Environmental Air Sampling Guide SKC Guide to OSHA/NIOSH/ASTM Air Sampling Methods SKC Passive Sampling Guide SKC HSE Sampling Guide Need help with hazard assessment for various industries and health concerns? See SKC Sampling Solutions Need help setting up your sampling media for calibration and collection? See SKC Sample Setup Guides Need comprehensive review of air sampling topics? See SKC Presentations: Webinars Presentations Videos
×
...
|
![]() | The Pocket Pump TOUCH personal air sample pump provides low flows from 20 to 500 ml/min for gas and vapor sampling. Pocket Pump TOUCH features touch screen operation, Bluetooth communication with the SmartWave mobile app and PC-based DataTrac Pro Software, powerful Li-Ion battery for 20+ hours run time at 500 ml/min, exhaust port for direct filling of sample bags, AC Adapter/charger, and more in a miniature pump that fits in your pocket. Pocket Pump TOUCH is UL Listed for intrinsic safety. |
Intuitive touch screen for easy programmability
Constant flows from 20 to 500 ml/min
Accommodates typical flow rates for sorbent tubes
Bluetooth communication with mobile devices and PC
Exhaust port for direct filling of sample bags
Optional quick-connect accessory for secure connection
Magnetic charging connector
Constant battery status display
Time, date, constant battery status, flow rate, sample volume, temperature, atmospheric pressure, remaining run time (programmed run), and
elapsed run time displayed on large backlit screen
Rubber overmolding on case provides quiet operation, impact protection, and a no-slip grip
Compact and only 8.3 ounces (235 grams)
> 20+ hours run time at 500 ml/min with powerful Li-Ion battery
Auto-dim feature conserves battery
Extended run times with AC adapter/charger
Multi-tube sampling
Sample with up to four tubes simultaneously; saves time and uses fewer pumps
Constant flow and pressure modes
Automatic flow fault and restart
Screen auto-lock provides for secure sampling
Flow Range in Constant Flow Mode | 20 to 500 ml/min |
Compensation Range in Constant Flow Mode | 20 to 500 ml/min up to 20 inches water back pressure |
Pressure Range in Constant Pressure Mode | 1 to 20 inches water |
Flow Control System | Corrects for changes in back pressure, temperature, and atmospheric pressure |
Power | Removable rechargeable lithium-ion (Li-Ion) battery, 3.6 V, 2.6 Ah, 9.36 Wh or USB charger |
Run Time (Li-Ion) | 20+ hrs at 500 ml/min up to 20 inches water back pressure, extended run times available with charger Tested using 37-mm 0.8-μm MCE filter with new pump and battery. Pump performance may vary. |
Charging Time (varies with battery capacity and level of discharge) |
< 10 hrs (< 4.5 hrs to 80%) |
Accuracy | Constant flow control: ± 5% of set-point or ± 3 ml/min, whichever is higher Atmospheric pressure: ± 0.3 in Hg Temperature: ± 1.0 C Real-time clock: ± 1% Constant pressure mode: Reading ± 0.5 inch water |
Temperature Ranges | Operating: 32 to 113 F (0 to 45 C) Charging: 32 to 113 F (0 to 45 C) Storage: -4 to 113 F (-20 to 45 C) |
Humidity Range | < 95% RH, non-condensing |
Altitude | Corrects flow for changes in temperature (32 to 113 F [0 to 45 C]) and ambient pressure up to 15,000 feet (4,572 meters) above and down to 2,300 feet (701 meters) below sea level |
Flow Fault | After 3 to 10 seconds of restricted flow, pump stops running, elapsed time stops, status LEDs flash red, and pump displays fault icon. After 20 seconds in fault, auto-restart is attempted up to 5 times unless full airflow is restored prior to that. If full airflow is not corrected during 5 restart attempts within 5 minutes, the pump ends the run and displays Sample Summary. |
Display Type/Parameters | High-contrast backlit LCD/Time, date, battery status, flow rate, sample volume, temperature, atmospheric pressure, back pressure, programmed run remaining time, and elapsed run time |
User Interface | Eight-area capacitive touch screen with auto-dim and locking options |
Dimensions | 3.2 x 3.8 x 1.5 in (8.1 x 9.7 x 3.8 cm) |
Weight | 8.3 oz (235 gm) |
Certifications/Markings | ![]() |
Case Material | IP 64-rated case, polycarbonate with rubberized anti-static overmolding |
Communications with PC | Low-energy Bluetooth, requires DataTrac Pro for Pocket Pump TOUCH USB Bluetooth Adapter (Cat. No. 877-94) |
Tubing | Requires 1/4-in ID tubing |
Pocket Pump TOUCH Sample Pump Operating Instructions (PDF)
Pocket Pump TOUCH Sample Pump Operating Instructions French (PDF)
Pocket Pump TOUCH Sample Pump Operating Instructions Spanish (PDF)
Pocket Pump TOUCH Installation/Operation Caution Guide
DataTrac Pro for Pocket Pump Touch Download
DataTrac Pro for PocketPump TOUCH User Manual (PDF)
SKC SmartWave App for Pocket Pump TOUCH
Technical Note: SKC Sample Pump Lithium-Ion Battery Pack Characteristics and Maintenance (PDF)
Technical Note: SKC Sample Pump Lithium-Ion Battery Packing and Shipping Requirements (PDF)
SDS Lithium-Ion Rechargeable Battery (PDF)
210-1000 PocketPump Touch ATEX Certificate
210-1000 Pocket Pump TOUCH UN Certificate
210-1000 Pocket Pump TOUCH UL Certificate