About SKC Terms of Use Privacy Policy
© Copyright 2019 SKC Inc. ISO-9001
TrainingMy AccountMy FavoritesCart
×
...
  Home » Catalog » Gas & Vapor Samplers » Sample Bags » Pocket Pump TOUCH (20 to 500 ml/min)

Pocket Pump TOUCH
20 to 500 ml/min


Orderable Items The Pocket Pump TOUCH personal air sample pump provides low flows from 20 to 500 ml/min for gas and vapor sampling. Pocket Pump TOUCH features touch screen operation, Bluetooth communication with the SmartWave mobile app and PC-based DataTrac Pro Software, powerful Li-Ion battery for 20+ hours run time at 500 ml/min, exhaust port for direct filling of sample bags, AC Adapter/charger, and more in a miniature pump that fits in your pocket. Pocket Pump TOUCH is UL Listed for intrinsic safety.



 

Intuitive touch screen for easy programmability


Constant flows from 20 to 500 ml/min

Accommodates typical flow rates for sorbent tubes

Bluetooth communication with mobile devices and PC

Smartwave icon

SmartWave app for IOS and Android devices allows mobile monitoring and control of one or multiple pumps and is available from the App Store or Google Play

DataTrac Pro icon
DataTrace Pro Software allows pump and data management from a PC and is available for download


Exhaust port for direct filling of sample bags

Optional quick-connect accessory for secure connection



Magnetic charging connector


Constant battery status display


Time, date, constant battery status, flow rate, sample volume, temperature, atmospheric pressure, remaining run time (programmed run), and elapsed run time displayed on large backlit screen


Rubber overmolding on case provides quiet operation, impact protection, and a no-slip grip


Compact and only 8.3 ounces (235 grams)



> 20+ hours run time at 500 ml/min with powerful Li-Ion battery

Auto-dim feature conserves battery

Extended run times with AC adapter/charger



Multi-tube sampling

Sample with up to four tubes simultaneously; saves time and uses fewer pumps

Constant flow and pressure modes



Automatic flow fault and restart


Screen auto-lock provides for secure sampling



 


 


 


 

Performance Profile

Flow Range in Constant Flow Mode 20 to 500 ml/min
Compensation Range in Constant Flow Mode 20 to 500 ml/min up to 20 inches water back pressure
Pressure Range in Constant Pressure Mode 1 to 20 inches water
Flow Control System Corrects for changes in back pressure, temperature, and atmospheric pressure
Power Removable rechargeable lithium-ion (Li-Ion) battery, 3.6 V, 2.6 Ah, 9.36 Wh or USB charger
Run Time (Li-Ion) 20+ hrs at 500 ml/min up to 20 inches water back pressure, extended run times available with charger
Tested using 37-mm 0.8-μm MCE filter with new pump and battery. Pump performance may vary.
Charging Time
(varies with battery capacity and level of discharge)
< 10 hrs (< 4.5 hrs to 80%)
Accuracy Constant flow control: ± 5% of set-point or ± 3 ml/min, whichever is higher
Atmospheric pressure: ± 0.3 in Hg
Temperature: ± 1.0 C
Real-time clock: ± 1%
Constant pressure mode: Reading ± 0.5 inch water
Temperature Ranges Operating: 32 to 113 F (0 to 45 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 113 F (-20 to 45 C)
Humidity Range < 95% RH, non-condensing
Altitude Corrects flow for changes in temperature (32 to 113 F [0 to 45 C]) and ambient pressure up to 15,000 feet (4,572 meters) above and down to 2,300 feet (701 meters) below sea level
Flow Fault After 3 to 10 seconds of restricted flow, pump stops running, elapsed time stops, status LEDs flash red, and pump displays fault icon. After 20 seconds in fault, auto-restart is attempted up to 5 times unless full airflow is restored prior to that. If full airflow is not corrected during 5 restart attempts within 5 minutes, the pump ends the run and displays Sample Summary.
Display Type/Parameters High-contrast backlit LCD/Time, date, battery status, flow rate, sample volume, temperature, atmospheric pressure, back pressure, programmed run remaining time, and elapsed run time
User Interface Eight-area capacitive touch screen with auto-dim and locking options
Dimensions 3.2 x 3.8 x 1.5 in (8.1 x 9.7 x 3.8 cm)
Weight 8.3 oz (235 gm)
Certifications/Markings PocketPump Touch Certifications and Markings
Case Material IP 64-rated case, polycarbonate with rubberized anti-static overmolding
Communications with PC Low-energy Bluetooth, requires DataTrac Pro for Pocket Pump TOUCH USB Bluetooth Adapter (Cat. No. 877-94)
Tubing Requires 1/4-in ID tubing


 


 


 


 

Pocket Pump Touch with callouts

 

 

 

Bluetooth communication with PC and DataTrac ProSoftware
Bluetooth® communication with PC and DataTrac® ProSoftware

 

USB charging with magnetic connector and sure-connect LED indicator
USB charging with magnetic connector and sure-connect LED indicator

 

Optional quick-connect for secure bag sampling
Optional quick-connect for secure bag sampling